This equipment is specially designed for the cleaning of hydraulic cylinder block and piston rod. This equipment is suitable for cleaning long parts. The workpiece is sent to the cleaning area by a transport trolley. The workpiece rotates during work. The outer surface is sprayed and cleaned uniformly with a certain pressure of the cleaning liquid. The inner surface is cleaned by a reciprocating nozzle with a brush. 。 After cleaning, the parts are discharged under the action of the conveyor chain and returned to the loading station .
two, Objects and requirements for cleaning
1, 液压缸体和活塞杆 Cleaning workpiece: hydraulic cylinder block and piston rod
Workpiece size: 最大 2500mm ，内径 50mm － 250mm The maximum length is 2500mm and the inner diameter is 50mm - 250mm
60 － 140mm Adjustable center height 60-140mm
2, Cleaning media: Kerosene or diesel
three, Cleaning process
The workpiece is loaded on the workbench → the workpiece is sent to the cleaning studio → the door is closed → the spray cleaning is started (the workpiece is rotated and the cleaning time is set) → the door is opened → the workpiece is sent out of the cleaning room → manual blanking
清洗喷淋系统： Fourth, cleaning spray system:
This equipment is equipped with the following special spraying devices.
，为固定喷管，布置在工件上方，随着工件旋转，使工件外表面都能清洗到 A is a fixed nozzle, which is arranged above the workpiece. As the workpiece rotates, the outer surface of the workpiece can be cleaned.
，为往复移动喷嘴，主要用于清洗内表面，往复移动喷嘴组由减速机牵引而作往复清洗，在喷头上制作毛刷，同时可以根据工件内径的大小更换。 B is a reciprocating nozzle, which is mainly used to clean the inner surface. The reciprocating nozzle group is pulled by a reducer for reciprocating cleaning. A brush is made on the nozzle and can be replaced according to the size of the inner diameter of the workpiece. When cleaning the piston rod, the reciprocating nozzle stops working.
The cleaning water pump uses a stainless steel centrifugal cleaning pump to ensure the reliable and stable operation and cleaning effect of the washing machine.