Trough type vibration grinder
◆ Use and scope
The working slot of this machine is long box-shaped, suitable for rust removal, sharp rounding, deburring and polishing of the workpiece, especially suitable for surface finishing with complex shapes. Parts polished and finished by this grinder not only maintain the original dimensional accuracy, but also can improve the surface roughness by 1-2 grades, so they have won the favor of crankshaft manufacturers.
When the vibration motor shaft rotates at a high speed, the unbalanced heavy load generates centrifugal force and dumping torque, and the working groove generates regular vibration through the action of the spring. Because the bottom of the container is circular, the force and amplitude of each point are different, which makes the working groove in the working groove Abrasives and workpieces both revolve around the center of the working groove, and they bounce and roll due to amplitude. The abrasives and workpieces move relative to each other. Grinding each other can remove burrs and rust spots on the surface, and brightly polish and sharpen the surface. circle
◆ Main specifications and technical parameters
1. Dimensions (length × width × height): 1300 × 1000 × 1320mm
2. Vibration motor power: 3kW
3. Working slot size: φ600 × 1000mm
Note: The size of the grinding tank of the equipment can be customized according to the parts, and the motor power can be adjusted according to the size of the equipment.